The power window regulator holds the window glass in place in your Ford vehicle. If you hit the window switch, it sends an electrical signal to the window motor. The window motor turns this electricity into mechanical power that it makes use of to show the gear on the window regulator which moves the regulator up or down. Within the event the window regulator breaks, binds or seizes up, you have to to exchange it. You probably have primary auto restore abilities, you may install a new power window regulator in your Ford in about an hour.
Ford Power Window Regulator Installation Instructions
1. Pry the Ford’s power window swap and switch bezel assembly out of the door panel with a trim tool. Pull the wiring connector out of the base of the ability window switch.
2. Take away the hex head screws from the door panel with the trim tool. Depending on the 12 months and model of your Ford, you might have to pry unfastened some trim covers to expose the screws. The screws may additionally require a Phillips head screwdriver to take away them, as soon as again depending in your Ford’s 12 months and model.
3. Elevate the Ford’s door panel off the door.
4. Hoist the Ford’s window glass to the highest of the window body and tape it there with packing tape.
5. Remove the retaining bolts from the window regulator on the window glass, door assist and window motor with a socket set.
6. Pull out the Ford’s outdated power window regulator and exchange it with the new one. Bolt the brand new power window regulator to the door assist, window glass and power windows motor with the socket set.
7. Reinstall the Ford’s door panel in reverse of how you eliminated it. Peel the packing tape off the Ford’s power windows and door before using the facility window.
